<font color='black' size='2' face='arial'>Hey All,
<div><br>
</div>

<div>Big doings this week...Wed. saw the trailer truck with the new engine on board arrive at the museum gate and considerable discussion followed concerning the ability to get onto the museum grounds. It was decided that the exhibitors gate would be the best bet ....it took three tries but squeezed in with only inches to spare. Once the truck was in the field we found the field was too soft to go any further than right at the gate so all unloading was done from there. The BIG Unloader fork lift worked very well and was able to handle all the pieces  without too much strain. Please note the tire tracks when you come in next week...the loads were heavy.</div>

<div>  Randy, Ernie, Ken and Lou were on hand to get it all accomplished.</div>

<div>Thursday we were able to finish the job and get the cylinder head and axle with some misc. parts into the shop. </div>

<div>  The boiler and steam fire pump on the hill were jacked up and new blocking was installed to get those pieces off the ground. I was unable to get pictures of that part and finally figured out why that light was blinking on my camera.</div>

<div><br>
</div>

<div>I am going to try to add a few pictures to this mailing and send additional pictures on separate mailings. I don't really know how to do this so if you don't get them you know I've failed in the attempt.</div>

<div><br>
</div>

<div>Yours truly,</div>

<div><br>
</div>

<div>Johnny Dollar</div>
</font>